Choose Which Site You Want To See
Trend 18/15x1/4tc Panel Mould Cutter
Trend 18/15x1/4tc Panel Mould Cutter: Ideal panelling cutter for kitchen or cabinet doors. D=32 mm C=11. 5 mm R=26 mm Shank Diameter=1/4 inch COSHH
Trend 18/30x1/2tc Panel Mould Cutter
Trend 18/30x1/2tc Panel Mould Cutter: For bevelling and panelling applications. D=29 mm D2=10 mm Cut length=11 mm A=30 degrees Shank Diameter=1/2 inch...
Trend 92/3x1/2tc Multi-mould Cutter
Trend 92/3x1/2tc Multi-mould Cutter: The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different...
Panel Mould Cutter
Panel Mould Cutter: Template thickness should be 5mm thicker than cut length of cutter Specifications D12 inch D127 mm C95 mm B127 mm R14...
Trend 3/74x1/4tc Two Flute Cutter 12 Mm Diameter
Trend 3/74x1/4tc Two Flute Cutter 12 Mm Diameter: Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean...
Panel Mould Cutter
Panel Mould Cutter: Some Ovolo cutters can be used with radius cutters to make rule joints Ref 701 has an extra long shank of 40mm...
Trend 23/12x1/4tc Guided Dish 4mm Rad X 12.7mm Dia
Trend 23/12x1/4tc Guided Dish 4mm Rad X 12.7mm Dia: The water channel cutters produce radiused rebates and grooves. Suitable for plunge cutting. Ref. 23/12X1/4TC can be...
Trend Trend T46/01x1/4tc - 12.7mm Diameter Trimming Cutter
Trend Trend T46/01x1/4tc - 12.7mm Diameter Trimming Cutter: For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding...
Trend C011x1/4tc Two Flute Cutter 7.9mm Diameter 1 Silver
Trend C011x1/4tc Two Flute Cutter 7.9mm Diameter 1 Silver: Trend Bearing guided chamfer angle=45 degrees C197X1/2TC Self-guiding chamfer/bevel cutter. Bearing follows the board...
Trend C001bx1/4tc Two Flute Cutter 3.2mm Diameter
Trend C001bx1/4tc Two Flute Cutter 3.2mm Diameter: Trend are the UK´s leading brand of router cutters, routing jigs and routing accessories and are available from over...
Trend C021x1/4tc Two Flute Cutter 12.7mm Diameter
Trend C021x1/4tc Two Flute Cutter 12.7mm Diameter: Trend are the UK´s leading brand of router cutters, routing jigs and routing accessories and are available from over...
Trend 31/10lx1/4tc Routaseal A=115¡ X 5mm Dia
Trend 31/10lx1/4tc Routaseal A=115¡ X 5mm Dia: Cuts groove for Trend Routaseal. Position seal into apex of jamb and stop. More economic to use than more complex...
Trend C012bx1/4tc Trend C012bx1/4tc Two Flute Cutter 7.9mm Diamet...
Trend C012bx1/4tc Trend C012bx1/4tc Two Flute Cutter 7.9mm Diameter 1 Silver - Silver: Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. Suitable for a wide...
Machine Mart Xtra Trend 41/5x1/4tc Router Cutter Guided 3 Flute 4...
Machine Mart Xtra Trend 41/5x1/4tc Router Cutter Guided 3 Flute 45 Degree Chamfer: Three flutes for extra fine finish
Trend 46/66x1/4tc Bearing Guided Ogee Cutter
Trend 46/66x1/4tc Bearing Guided Ogee Cutter: Supplied with two bearings. The larger bearing removes the bottom quirk. D=35 mm Cut length=17. 5 mm B=9. 5 mm B2=12. 7...
Trend Snap/cb/4tc Trend Snap/cb/4tc Snappy Tc Counter Bore 6.35mm...
Trend Snap/cb/4tc Trend Snap/cb/4tc Snappy Tc Counter Bore 6.35mm X 12.7mm - Silver: 1 x Robertson No 1 Screwdriver bits 1 x Robertson No 2 Screwdriver bits Square Robertson screwdriver...
Trend Trend 46/902x1/4tc Guided Profiler 9.5mm Dia X 12.7mm
Trend Trend 46/902x1/4tc Guided Profiler 9.5mm Dia X 12.7mm: Profiler with shank mounted bearing guides.
Machine Mart Xtra Trend 46/913x1/4tc Guided Profiler 12.7mm Dia X 12.7mm
Machine Mart Xtra Trend 46/913x1/4tc Guided Profiler 12.7mm Dia X 12.7mm: Profiler with shank mounted bearing guides.
Trend 46/261x1/4tc Two Flute Guided Cove1.6mm Rad
Trend 46/261x1/4tc Two Flute Guided Cove1.6mm Rad: The two bearing bearings supplied offer the means of cutting different depth of mouldings.
Trend 35/0x1/4tc Keyhole Slotter 9.5mm Dia
Trend 35/0x1/4tc Keyhole Slotter 9.5mm Dia: A keyhole recess for picture hanging flush to the wall. Ref. 35/0 - No. 8 & No. 10 screw heads. Ref. 35/01 - No. 10 &...
